Product dimensions
Installation
Over the sink as the primary faucet
Flow rate
Max 1.8gpm / 6.81 lpm
Sparkling water flow rate
0.4 gpm / 1.51 lpm
Mixer type
Ceramic disc cartridge
Water outlets
Installation requires both hot and cold water supplies
Clearance for handle
Minimum distance from center hole to wall: 3 7/16” (88mm)
Water outlets
Installation requires both hot and cold water supplies
Water pressure
Min 37psi – Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79lpm)
Water connection
2 x 1/2” BSP or 3/8” FPT compression (depending on manufacture date) with shut off valve is required within 3’ (0.9m) of the installation
Integral water values
All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure Limiting Valve
Water supply requirements
Potable drinking water supply
Optimal total dissolved solids (TDS) range
TDS Min 50ppm – Max 150ppm
Integral water filter
0.2 micron, 1 size - replace every 1,100 gallons / 4,163 liters or 12 months
Power rating
110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
Command center dimensions (WxDxH)
13.3” x 18.2” x 13.1” / 339mm x 462mm x 333mm
Minimum air gap
Minimum of 2” / 50mm clearance on left and right side and 8” / 200mm above
Minimum cabinet Size (without garbage disposal)
20” wide x 24” deep / 508mm wide x 610mm deep
Minimum cabinet size (with garbage disposal)
When installing the HydroTap Celsius All-in-One BCS 120V in a cabinet with a garbage disposal, the cabinet must be at least 30” wide x 24” deep and the sink must have an off-centered drain to allow for the placement of the garbage disposal off to one side and the command center to the other.
Maximum hose connection length
3’ / 0.9m (tap to command center)
Minimum distance needed for installation
15” / 381mm (interior wall to garbage disposal)
Warranty
3 years (2 year Limited Warranty plus additional 1 year available on product registration)
Compatible CO2 cylinder
Zip Water 1.5lb CO2 or 5lb CO2 (if space allows) with CGA-320 fitting
CO2 operating pressure
Min 39psi - Max 44psi / Min 2.74 - Max 3.09kg/cm2