Product dimensions
Hole size
1 - 3/8” / 35mm
Tap height
8 11/16” (221mm) or 14” (356mm) when installed with the optional font
Installation
Over sink as a secondary tap or on optional font / drip tray
Flow rate
Max 1.8gpm / 6.8lpm
Sparkling water flow rate
0.4 gpm / 1.51lpm
Product certifications
IAPMO - NSF/ANSI 372, 42, 53, CSA B438.1, ASSE 1087; cUL; CEC
Product order code
01043467
Water pressure
Min 37psi – Max 100psi (2.60 - 7.03kg/cm2 ) with a minimum flow rate of 1 gpm (3.79 lpm)
Water connection
½” BSP - isolation valve is required within 3’ (0.9m) of the installation
Integral water values
All HydroTap systems are fitted with a Dual Check Valve and a 50psi (3.52kg/cm2) Pressure Limiting Valve
Water supply requirements
Potable drinking water supply
Optimal total dissolved solids (TDS) range
TDS Min 50ppm – Max 150ppm
Integral water filter
0.2 micron, 1 size - replace every 1,100 gallons / 4,163 liters or 12 months
Power rating
110-120V, 50-60Hz, 15 amp power supply with a NEMA 5-15 outlet
Dimensions (WxDxH)
11” x 16” x 13.1” / 280mm x 406mm x 333mm
Minimum air gap
Minimum of 2” / 50mm clearance on left and right side and 8” / 200mm above
Minimum cabinet size
18” wide x 15” deep / 457mm wide x 381mm deep
Maximum hose connection length
3’ / 0.9m (tap to command center)
Minimum distance needed for installation
15” / 381mm (interior wall to garbage disposal)
Product approvals
IAPMO - NSF/ANSI 372, 42, 53, CSA B483.1, ASSE 1087; cUL; CEC
Compatible CO2 cylinder
Zip Water 1.5lb CO2 or 5lb CO2 (if space allows) with CGA-320 fitting
CO2 operating pressure
Min 39psi - Max 44psi / Min 2.74 - Max 3.09kg/cm2